How to Screen Entry-Level Candidates With No Experience: A 5-Step Guide

How to Screen Entry-Level Candidates With No Experience: A 5-Step Guide

To screen candidates with no experience, judge what they can do now instead of what they've done before. Use five steps in order: write the job's must-haves, ask every applicant the same short application questions, give a brief skills test or work sample, run a structured interview with a scoring guide, and check references with the finalists. Apply each step the same way to everyone. That's what hiring for potential instead of experience looks like in practice.

This guide works for any industry, from customer service to warehouses to offices. We make the Career Potential Test (CPT), a free general test that can fill the skills-test step, so we have a stake in that part. We've kept it to one option among several, with its limits spelled out.

Key takeaways

  • Write 3 to 5 must-haves before you post, and drop experience or degree demands the job doesn't need.
  • The U.S. Office of Personnel Management (OPM) defines a structured interview as the same questions, in the same order, scored on the same scale.
  • OPM says applicants often see work samples as very fair, though they take time to build.
  • OPM recommends at least three reference contacts, done near the end, at about 20 minutes each by phone.
  • EEOC guidance says tests must be job-related, testing needs reasonable accommodations, and you can't ask about disability before a job offer.
  • Our example funnel goes from 120 applicants to 2 offers in about 21 hours of team time.

A free skills check for applicants without a track record

Let candidates send you a Career Potential Test score as an optional qualification, with no account or setup on your side.

See the CPT for employers

What's on this page

What should you screen for when candidates have no experience?

Screen for the abilities the job uses in its first few months, and match each one to the step that checks it best. A resume with no job history tells you little, which is why entry-level hiring produces such weak signal. Each step below gathers direct evidence instead.

What the job needs (example)How to check itWhich step
A legal or schedule requirement, like a driver's license or a 7 a.m. startA yes or no questionApplication
Clear writingA 3 to 4 sentence written answerApplication, work sample
Learning new tasks quicklyA short task with written instructions, or a general aptitude testSkills test
Job math, like totals or measurementsA 10-minute quiz built from real job numbersSkills test
Handling customers or teammatesSituational interview questions with a scoring guideStructured interview
Showing up and following throughQuestions to a teacher, coach or past supervisorReferences

The steps run from cheapest to most time-consuming. Our guide on how electrical contractors screen apprentice applicants shows a trade-specific version.

Step 1: How do you write must-haves for a job that needs no experience?

List what a new hire actually does in the first 90 days. Then mark each ability as "must have on day one" or "we can teach it." Keep three to five must-haves. Everything else goes in a nice-to-have list that never decides who advances.

A few rules make the list hold up:

  • Describe tasks, not credentials. "Enters 40 orders a day with few errors" tells you what to test. "2 years of experience" doesn't.
  • Drop requirements you can't defend. If a degree or prior job isn't needed to do the work, remove it or add an "or" route, such as a work sample or a test score.
  • Watch the ad's wording. The EEOC says it's illegal to publish a job ad that "shows a preference for or discourages someone from applying" because of a protected trait such as age or sex.

OPM's advice for building interview questions starts from the same place: tie them to "competencies identified through a job analysis." Your must-have list is a small job analysis. Every later step should trace back to it.

Step 2: What application questions work for candidates with no experience?

Ask three to five short questions that every applicant answers, and score them with a simple key. Questions about school, volunteering, sports, family duties or hobbies give people without job history a fair way to show what they can do.

Examples you can adapt:

  • "This role starts at 7 a.m., Monday to Friday. Can you work that schedule?" (yes or no, only if the schedule is a true requirement)
  • "Tell us about a time you had to learn something new quickly. What did you do?" (scored 1 to 3 for a clear, specific answer)
  • "A customer emails that their order arrived late. Write a 3 to 4 sentence reply." (scored 1 to 3 for tone, clarity and a next step)

Keep knockout questions to real legal or schedule needs. The EEOC says information gathered during hiring "should be limited to those essential for determining if a person is qualified for the job." Its page on pre-employment inquiries adds that you may ask whether an applicant can do the job and how they would do it, but you may not ask whether they have a disability or require a medical exam before making a job offer.

Step 3: Should you use a skills test or a work sample?

Use whichever one mirrors the job more closely, and keep it short. Ten to thirty minutes is enough at this stage.

A work sample is a slice of the real job. OPM describes work sample tests as tasks that "mirror the tasks employees perform on the job," and gives the example of an administrative assistant applicant transcribing an internal memo on a word processor. OPM lists the trade-offs: high return when you need specific skills on day one, but they "may be costly to develop" and "time consuming and expensive to administer." It also notes that "applicants often perceive work samples as being very fair."

A ready-made test saves you the build. Options range from free plans to annual contracts. Our guide to free pre-employment tests for entry-level hiring covers the free choices, and our pre-employment test pricing comparison lists what paid vendors publish. For role-specific examples, see how to test IT help desk candidates and how to test bookkeeping candidates.

Whichever you pick:

  • Give every candidate the same task, time limit and instructions.
  • Set the passing score before you grade anything.
  • Tell candidates how to ask for an accommodation, and grant reasonable ones.
  • If a task takes more than an hour, consider paying for the time, since unpaid work can drive good applicants away.

Step 4: How do you run a structured interview with entry-level candidates?

Ask every candidate the same questions, in the same order, and score each answer on the same scale. That is OPM's definition: "All candidates are asked the same predetermined questions in the same order," and "all responses are evaluated using the same rating scale and standards for acceptable answers."

OPM describes two kinds of questions: ones about "behavior in past experiences" and ones about "proposed behavior in hypothetical situations." Hiring teams often call these behavioral and situational questions. Situational questions suit people with no work history, and behavioral ones still work if you let candidates draw on school or personal life.

OPM also suggests open-ended questions at "an appropriate reading level" that ask for the "most, last, worst, least, or best" example.

Sample questions (our example) for a customer-facing role:

  1. Situational: "A customer is upset about a mistake you didn't make. What do you say first, and why?"
  2. Situational: "Your manager gives you two urgent tasks at once. How do you decide which comes first?"
  3. Behavioral: "Tell me about the last time you had to learn a new skill fast."
  4. Behavioral: "Describe a time you worked with someone you disagreed with. What happened?"

For scoring, OPM's example rates each competency from 1 to 5, has each interviewer "record the score he or she gave a candidate" separately, and recommends equal weights unless you document why one counts more. Write a short note of what a 1, 3 and 5 answer sounds like before the first interview.

Step 5: How do you check references for someone with no work history?

Ask people who have seen the candidate follow through: a teacher, coach, volunteer coordinator or part-time supervisor. OPM defines reference checking as an evaluation of past performance using information from people who "have known and worked with the applicant."

OPM's guidance on doing it well:

  • Timing. Do it "near the end of the selection process," when choosing among a handful of finalists.
  • How many. "A minimum of three contacts is recommended."
  • Format. Use a structured phone call with the same set of questions for every candidate, based on the job analysis. OPM says this takes about 20 minutes per contact.
  • Stay job-related. OPM advises against questions not directly related to the job.

If you hire a company to run background checks, the EEOC's background-check guidance says you must tell the applicant in writing, "in a stand-alone format," and get their written permission first. In all cases, it says, "make sure that you're treating everyone equally."

What does a fair screening process look like from start to finish?

Here's a made-up example: a small company hiring 2 entry-level customer service reps gets 120 applicants. The numbers are examples only, and they add up.

StepPeople inPeople keptTeam time (example)
1. Application review: schedule question plus 2 scored answers120483 minutes each, 6 hours
2. 15-minute work sample: reply to 2 customer emails and total an invoice48 sent, 40 finish16 meet the bar6 minutes each to grade, 4 hours
3. Structured interview, 4 questions scored 1 to 5163 finalists30 minutes each, 8 hours
4. Reference calls, 3 contacts per finalist32 offers9 calls x 20 minutes, 3 hours

Total: about 21 hours of team time for 2 hires.

To keep a process like this fair, follow the EEOC's guidance on employment tests: tests must be job-related, a neutral test can still be unlawful if it disproportionately screens out a protected group and isn't justified by the job, and employers must make reasonable accommodations "including in the administration of tests." The EEOC adds that even with a vendor's test, "the employer is still responsible for ensuring that its tests are valid."

After each hiring round, compare pass rates by group. Federal agencies use a four-fifths rule of thumb: a race, sex or ethnic group's selection rate below 80% of the highest group's rate is generally treated as a substantially different rate. The EEOC says this is a practical guide, not a legal definition. This article is general information, not legal advice, so have employment counsel review your process.

How do you hire for potential, not experience?

Hiring for potential means judging how well someone can learn and do the job's core tasks, using evidence you collect yourself instead of a work history. As of November 2026, federal hiring guidance from OPM and the EEOC points to four tools, used together and scored the same way for everyone:

  1. Run a structured interview. Ask every candidate the same questions in the same order and rate every answer on one scale, as OPM defines it. Lean on situational questions ("What would you do if...") so people without job history can answer well.
  2. Give a short work sample. Have candidates do a small slice of the real job, such as replying to a customer email or totaling an invoice. OPM notes that applicants often see work samples as very fair.
  3. Add an optional cognitive score. OPM says tests of general cognitive ability are good predictors of job performance and training success for a wide variety of jobs, and that they work better as the job gets more complex. It also says these tests typically produce larger racial and ethnic differences than other valid predictors, and recommends using other methods, such as structured interviews, alongside them to lower possible adverse impact. So treat a score as one input or an optional route, not a lone cutoff (OPM).
  4. Score everything the same way. Write the scoring guide and the passing bar before you review anyone. Give each candidate the same task, time limit and instructions, offer reasonable accommodations, and compare pass rates by group after each round, as the EEOC guidance in the section above describes.

These four tools are Steps 3 and 4 of the process above, plus the fairness checks that run through all five steps.

Where does the Career Potential Test fit in entry-level screening?

The CPT can fill Step 3 when you want a general measure instead of a job-specific task. It's free for employers and candidates, has 55 adaptive questions in Critical Thinking, Reading, Writing and Math, and takes up to an hour (15 minutes per section). It's proctored by webcam on a desktop or laptop. Candidates take it on their own and send you a results link showing a percentile compared to other test-takers and a score for each section. You don't need an account. Setup steps and sample posting wording are in how to add the CPT to your job postings.

Be clear about its limits:

  • It's new, and we haven't published validation studies. We can't show how scores relate to job performance.
  • It isn't job-specific. It won't tell you if someone can run your software or handle your products. A work sample still does that better.
  • It's long. Up to an hour on a webcam computer is a real ask at the application stage.
  • You see only shared scores. There's no dashboard, retakes are free, and the results page shows the most recent attempt.
  • We have a business reason to offer it free. If you don't move forward with a candidate, we may introduce them to CourseCareers courses.

We recommend using it as an optional qualification, such as "or an 80%+ CPT score in place of experience," and as one data point among several. Don't make it mandatory or the only reason to reject someone, and apply it the same way to everyone. A CPT score is one signal, not a credential.

Our recommendation: Write your must-haves and scoring guides before you open the role, then run the five steps in order. Use a short work sample when the job has one clear core task, and add a free general test like the CPT as an optional route for applicants whose resumes are empty but whose abilities aren't.

Frequently Asked Questions

How do you evaluate a candidate with no work experience?
Test what they can do now. Use short scored application questions, a work sample or skills test tied to the job, a structured interview and references from teachers, coaches or volunteer leaders.

What does it mean to hire for potential instead of experience?
It means judging what a candidate can learn and do now instead of screening on past job titles. In practice, use a structured interview, a short work sample and, if you like, an optional general aptitude score, and score every applicant the same way.

What questions should you ask an entry-level candidate with no experience?
Ask situational questions about how they'd handle job scenarios, and behavioral questions that let them use school, sports or volunteer examples. Ask everyone the same questions in the same order and score each answer on a set scale.

Is it legal to give entry-level applicants a test?
EEOC guidance allows employment tests that are job-related and consistent with business necessity, given with reasonable accommodations. Check pass rates by group, and since this is general information, not legal advice, ask an employment lawyer about your situation.

Who can give a reference if a candidate has never had a job?
A teacher, coach, volunteer coordinator, internship host or part-time supervisor can speak to reliability and effort. OPM recommends at least three contacts.

How long should a skills test be for an entry-level job?
Ten to thirty minutes is usually enough at the screening stage. Longer tasks fit later, with fewer candidates, and are worth paying for.

Give applicants without experience a way in

Add the free Career Potential Test to your posting as an optional qualification and review the scores candidates share.

Set up the CPT for free

Sources