Congrats on being referred to CourseCareers! Find your next career path now with no upfront cost.
100% Scholarships Available. Open to Everyone.
See Scholarship Details
To hire entry-level HVAC techs or helpers with no experience, screen for what you can't easily teach: showing up on time, basic math and reading, mechanical sense, physical readiness for attics and rooftops, and a clean driving record if the job drives a van. Then plan for the one rule you can't skip. Under EPA Section 608, anyone who maintains, services or repairs equipment that could release refrigerant (including hooking up gauges or adding refrigerant) must be certified, unless they are a registered apprentice closely and continually supervised by a certified technician.
This guide is for owners and service managers at small HVAC companies. Federal rules and figures here come from epa.gov, ecfr.gov, bls.gov, apprenticeship.gov and eeoc.gov, read in November 2026. This is general information, not legal advice; state and local rules can add requirements, so check with an employment lawyer.
We make two things that come up here: the free Career Potential Test (CPT), which some employers use for screening, and an online HVAC course for people trying to land their first job. So we aren't neutral. We explain where each fits, and where it doesn't, near the end.
Key takeaways
A free signal for applicants with no resume
Candidates can take the Career Potential Test online and send you a results link with a percentile and a math, reading, writing and critical thinking breakdown.
See the CPT for employersWhat's on this page
Screen for the habits and basic skills that make someone trainable. You'll teach the trade itself. The BLS lists qualities HVAC workers need, including math, mechanical and customer-service skills, physical stamina and strength. Turn the ones that matter on your jobs into checks you can run on someone with no HVAC history.
| What you need in a new helper | A check you can run without HVAC experience | What a weak answer looks like |
|---|---|---|
| Shows up and follows through | Did they confirm, arrive on time and finish each step you scheduled? | Missed a scheduled call with no message |
| Basic math | A 10 to 15 minute quiz with tape-measure readings, fractions and a simple materials total | Can't add 3/4 and 5/8, or skips the units |
| Reading | Have them read a one-page install sheet and answer three questions | Answers from memory instead of the sheet |
| Mechanical sense | Ask how they fixed a bike, car, appliance or anything with moving parts, or use a short mechanical reasoning test | No example of ever taking something apart |
| Physical readiness | State the real demands in the posting (attics, ladders, heat, lifting) and ask if they can do the job as described | Surprise at the conditions during the working interview |
| Driving, if the role drives | A valid license and a driving record check, run the same way for everyone | Not applicable if the helper always rides along |
Don't screen out for missing HVAC vocabulary; that's what training is for. For a general version of this process, see our guide on screening entry-level candidates with no experience.
Before a conditional job offer, ask whether someone can do the job's tasks, not whether they have a medical condition. Our explainer on whether pre-employment aptitude tests are legal covers the federal testing rules (general information, not legal advice).
Not to be hired, but they need it, or close supervision, before they handle refrigerant. Here's what EPA's Section 608 pages said when we read them in November 2026 (the certification pages were last updated November 16, 2026).
Who must be certified. EPA requires technicians who "maintain, service, repair, or dispose of equipment that could release refrigerants into the atmosphere" to be certified. Its definition of a technician includes anyone who attaches or detaches hoses and gauges to measure pressure, or adds or removes refrigerant.
The apprentice exception. EPA says apprentices are exempt from certification "provided they are closely and continually supervised by a certified technician." EPA's regulation (40 CFR 82.152) defines an apprentice as a person "currently registered as an apprentice" in this kind of work with the Department of Labor's Office of Apprenticeship or a recognized State Apprenticeship Council, and adds that a person "may only be an apprentice for two years" from first registering. So a new helper you hired directly, who isn't in a registered program, doesn't get this exemption.
The four types.
| Certification | What EPA says it covers |
|---|---|
| Type I | Servicing small appliances |
| Type II | Servicing or disposing of high- or very high-pressure appliances, except small appliances and motor vehicle AC |
| Type III | Servicing or disposing of low-pressure appliances |
| Universal | Servicing all types of equipment |
Match the type to the equipment your crews actually service.
How it's earned. The tests "must be administered by an EPA-approved certifying organization." Each test is specific to equipment type, and EPA says the core test must be proctored to earn Universal certification. The credential doesn't expire.
Why it matters to your purchasing too. EPA's refrigerant sales page says a seller must verify that the buyer "either 1) is a certified technician, or 2) employs a certified technician."
A practical plan (our suggestion): hire for aptitude, have the new person study for the 608 exam in the first months, and keep them off refrigerant work until they pass, unless they are a registered apprentice under close, continual supervision. Our EPA 608 practice test is free if you want something to hand a new hire.
Use a short structured interview, then (our suggestion) a paid working interview for your top few. Both work better when you write the questions, tasks and scoring before the first applicant arrives.
Ask everyone the same questions in the same order and score each answer 1 to 5. Examples you can adapt:
Write what a 1, 3 and 5 sound like for each. A 5 on question 1 calls ahead before the start time.
A half day riding along shows you more than any test. Pay for the time, give each candidate the same tasks, and keep them away from refrigerant circuits. Tasks we'd suggest:
Score punctuality, safety habits (gloves, ladder setup) and whether they ask questions, on the same sheet for everyone.
Example cost (made-up numbers): 3 finalists × 4 hours × $20 an hour = $240 in wages, plus about 12 hours of a lead tech's time. Compare that with the cost of a hire who quits in week two.
Only check what the job needs, and check it the same way for everyone. If the helper will drive a company vehicle, say so in the posting and make a valid license part of the requirements. If the helper always rides with a tech, a license may not be a real requirement.
If you hire a company to pull driving records or run a background check, the joint EEOC and FTC page on background checks (issued March 2014) describes federal duties under the Fair Credit Reporting Act. Before the check, you must tell the applicant in writing, "in a stand-alone format," and get their written permission. Before you reject someone based on the report, you must give them a copy of it and "A Summary of Your Rights Under the Fair Credit Reporting Act." The page also says to treat everyone equally.
That page doesn't address driving records specifically. Ask your insurance carrier and an employment lawyer before you set a standard, since state and local laws can add rules.
The BLS Occupational Outlook Handbook gives this picture for heating, air conditioning and refrigeration mechanics and installers. These figures cover the whole occupation at every experience level, not helpers alone, and they aren't CourseCareers student pay.
| Measure (BLS) | Figure |
|---|---|
| Median annual pay, May 2025 | $61,010 ($29.33 an hour) |
| Lowest 10% earned less than | $40,050 |
| Highest 10% earned more than | $95,210 |
| Median at plumbing, heating and AC contractors | $60,030 |
| Jobs in 2025 | 440,900 |
| Projected growth, 2025 to 2035 | 11% |
| Average openings per year | About 40,600 |
With steady demand, a fast, clear process helps you keep good applicants. A written raise schedule tied to skills (such as passing the 608 exam) is one way to make an entry-level offer easier to accept.
The BLS also notes that HVAC work has "one of the highest rates of injuries and illnesses of all occupations," and that technicians sometimes work overtime or irregular schedules during peak heating and cooling seasons. Say both plainly in the interview so nobody quits from surprise. For a deeper look at pay, see our HVAC technician salary guide.
Either can work. Our suggestion: a small shop can start with direct hires and look at a registered apprenticeship once it hires every year (registration also matters for the EPA 608 apprentice exemption above). The BLS says HVAC workers typically need a postsecondary nondegree award (programs generally last 6 months to 2 years), some train through apprenticeships that usually last several years, and employers sometimes consider candidates whose highest education is a high school diploma.
Apprenticeship.gov describes two ways in for an employer:
Programs are approved by the U.S. Department of Labor or a State Apprenticeship Agency. Its requirements reference guide sets a few ground rules worth knowing before you call:
Apprenticeship.gov lists HVAC technicians among high-demand construction apprenticeships, and its Express Interest form connects employers with an apprenticeship consultant. If your applicants are also applying to union or contractor-association programs, our guide to the HVAC apprenticeship test shows what those programs ask.
The CPT is for your screening; the course is for candidates who want to show up prepared.
The Career Potential Test is free for you and for applicants, with no account needed. Applicants take it online in up to an hour (55 questions in Critical Thinking, Reading, Writing and Math, proctored by webcam on a desktop or laptop) and send you a results link with a percentile compared to other test-takers and a score per section. Setup takes under 5 minutes. See the CPT for employers.
Its limits, plainly:
We suggest listing it as an optional qualification, for example "No experience required. A CPT results link is welcome with your application," and using it as one data point among several, the same way for everyone. Don't make it the only reason you turn someone down.
Our HVAC course is online and self-paced (shown on our site as 4 to 8 weeks), built to help people land a first apprenticeship or entry-level HVAC job. It starts with a free introduction, then costs $499 once or four payments of $150. It is not accredited, it isn't hands-on training, and it doesn't replace EPA 608 certification, a state license, apprenticeship hours or trade school where a state requires hours. You'll still train anyone who finished it on your own systems.
Our recommendation: Before your next opening, write a one-page process: real requirements in the posting, a 15-minute math and reading check, four scored interview questions, and a paid half-day ride-along for your top two or three. Hire for reliability and trainability, plan the EPA 608 exam into the first months, and add the CPT as an optional extra signal if you want one.
Can I hire an HVAC helper with no certification?
Yes. EPA Section 608 certification is needed before someone maintains, services, repairs or disposes of equipment that could release refrigerant, and EPA exempts only registered apprentices while a certified technician closely and continually supervises them. Keep any other uncertified helper off refrigerant work.
Which EPA 608 certification does an HVAC tech need?
It depends on the equipment. EPA's Type I covers small appliances, Type II high- or very high-pressure appliances (except small appliances and motor vehicle AC), Type III low-pressure appliances, and Universal covers all of them.
Does EPA 608 certification expire?
No. EPA says Section 608 technician certification credentials do not expire.
What should I test an entry-level HVAC applicant on?
Basic math (fractions and measurements), reading an install sheet, and mechanical sense, plus a structured interview on reliability and customer manners. Skip HVAC knowledge for brand-new applicants, since that's what you'll train.
How much do HVAC technicians earn?
The BLS reports a median of $61,010 a year ($29.33 an hour) for HVAC mechanics and installers in May 2025. That covers all experience levels; the lowest-paid 10% earned less than $40,050.
Is the Career Potential Test free for HVAC contractors?
Yes. It's free for employers and applicants, needs no account, and applicants share a results link. It tests general skills, not HVAC knowledge, and we haven't published validation studies.
Know a future HVAC tech?
Our HVAC course starts with a free introduction, so a candidate can see what the trade involves before they apply.
Start the free HVAC intro